Chalco 7075 precision machined rolled aluminum plate is probably the most famous high-strength rolled plate, and is used regardless of the individual requirements in nearly all sectors of the capital goods industry. In material temper T7351, it is also suitable for application where there is a risk of stress corrosion cracking.

Characteristics of Chalco 7075 precision machined rolled aluminum plate:
1. Two surfaces preccision milled, roughness Ra 0.4um, foiled on both sides.
2. Fine surface miling as requirement. Good surface quality.
3. Very high strength
4. Ideally suitable for structural etching
5. Excellent polishing properties
6. Very good machinability
Specification of Chalco 7075 precision machined rolled aluminum plate:

Alloy Composition:
Alloy:  EN573-3/3.3547   7075
Material features: T651

Material Properties:
Machinability:   good
Weldability:    Very good
Anodic oxidation properties: Good, not decorative
Polishability:      good
Corrosion resistance: Very good
WEDN machining: good
Typical Mechnical Properties:
Tensile strength Rm: 530—540 Mpa
0.2% Yield strength Rp0.2:  460—470 Mpa
Breaking elongation A5%:  5--8
Brinell hardness HBW:     158--161

Typical Physical Properties:

Density:  2.80g/cm3
Thermal conductivity:   130—160W/(Mk)
Electrical conductivity:   19—23MS/m(m/Ωmm2)
Elastic modulus:       ˜71,000N/mm2

Thickness ranges and sizes:

Plate thickness between  12mm---100mm
Standard sizes are:
Thickness     ×    Max. Width     ×  Max. Length
>=12mm       ×   1570mm         ×  3670mm
Other dimension available on request
Tolerance:

Surace:   Precision milled
Surface roughness Ra  <=0.4um
Thickness tolerance: +/-0.05mm
Flatness:     >12—100mm  thickness<=0.12mm
Tolerance in width: -0+10mm
Tolerance in length: -0+15mm

Application of Chalco7075 precision machined rolled aluminum plate:

Mold-making, in particular blow molds for plastics processing and PUR foam molds are preferably made of rolled plate EN 7075.

Mechanical engineering, tool carriers, tool changers, tool clamps, etc, 7075 precision machined rolled aluminum plate is always used.

Tool making, highly loaded anvil caps, punch retainer and embossing plates are often made of 7075 precision machined rolled aluminum plate.

Industrial robots, different versions of gripping claws, clamping and tensioning devices for heavy loads are produced by 7075 precision machined rolled aluminum plate.